Looking for:
Logic pro x 10.3 minimum requirements free |
Logic Pro - Free Trial - Apple. Logic pro x 10.3 minimum requirements free
Logic Remote Changes to the length of a pattern region are now immediately visible in Logic Remote on iPhone. It is now possible to activate the Filters in the Gate plug-in using Logic Remote. Control surface and MIDI controller support If a newer LUA script for an installed control surface is available, Logic will now use that instead of the built-in settings.
Logic now retains changes made to the display mode of control surfaces running in Logic Control mode. The Control Surface setup window now displays the correct group number for a selected device. Fixes an issue where Novation Launchpad could unexpectedly show closed Track Stacks as being empty.
Setting a control surface to move the play head by ticks no longer causes the play head to only move backwards. Control surfaces now update to select newly created tracks in Logic. Changing an assignment control name in the Controller Assignments window now updates the name in the Key Commands window and Smart Controls assignments inspector. It is now possible to edit an assignment in the Controller Assignments window if a Smart Controls inspector is also open.
Export and bounce Fixes an issue where canceling bounce-in-place of a pattern region could cause the region to become corrupted and uneditable. Sound from Remix FX is now included in bounced projects.
Content It is now possible to load a channel strip CST file by dragging it from the Finder to the channel strip header. Undo Fixes an issue where a triple click could prevent additional undo steps from being added. Score The strum up and strum down markings are now displayed as expected in the Tablature Settings window.
Editing Notes created with the Brush tool now reliably use the quantize values chosen by key commands. Scale and Quantize settings in the Piano Roll no longer reset to defaults when the Piano Roll window is closed and then re-opened. Selecting a region in the Event List editor now deactivates an active Marquee selection. Fixes an issue where edits to the currently selected and zoomed track could affect another track.
Auto-punch using Marquee selection now works consistently. Fixes an issue where certain projects appear to cause Logic to hang when they are opened. Fixes an issue where Logic could quit unexpectedly when selecting channels in multi-mono mode.
Logic no longer quits unexpectedly when dragging an audio file to Quick Sampler or enabling Flex Pitch if the Logic application has been renamed and the system is set to a language other than English. Resolves an issue where Logic could quit unexpectedly when converting certain stereo projects to Spatial Audio. Fixes an issue where Logic could quit unexpectedly when moving a region from an active to an inactive Track Alternative.
Logic no longer quits unexpectedly when converting the surround bed mode when converting a project to Spatial Audio. Performance Opening or closing a Track Stack no longer causes audio dropouts when playing a Spatial Audio project.
Spatial Audio The Dolby Atmos plug-in now shows the top channels after the bed track format is changed to 5. Changing the surround bed format of a project to 5. Content Certain Ultrabeat kits no longer trigger a dialog indicating samples need to be downloaded each time they are chosen, in cases where the Sound Library has been relocated.
Search results now remain visible when navigating among found items in the Sound Library. Export Resolves and issue where the last audio file in a project created from an imported ADM file could be silent when exported as a new ADM file.
Score Rests that were manually created in earlier version of Logic no longer show as note events in Logic Pro Environment All Touch Tracks trigger modes now work reliably. General Copying a Marquee selection to the Clipboard no longer leaves the original selection divided at the Marquee borders.
Optimized for Apple silicon on new MacBook Pro models. More than new instrument and audio patches. It is now possible to paste regions copied from multiple tracks to new tracks using a Marquee selection to define the starting track and position.
Stability and reliability Resolves an issue where Logic could quit unexpectedly when a Flex Pitch note is created in an empty region. Fixes an issue where Logic could quit when setting a patch as Default. Fixes an issue where Logic could quit sometimes when saving songs from previous versions of Logic to the Logic project format.
Fixes an issue where editing global text objects in multi-page view in the Score can cause errors or for Logic to quit. Fixes an issue where Logic would quit unexpectedly when adjusting zoom of the Alchemy Waveshaper or Convolution Reverb using two finger gestures.
Fixes an issue where Logic would quit unexpectedly when loading a project that contains a stereo instance of ES2 with a modulation of "Diversity" from a setting created in a surround instance of ES2.
Resolves an issue where Logic could quit unexpectedly when exporting a movie file with its original AAC audio track. Resolves an issue where Logic could hang if both the New Track window and Control Surface Setup window are open at the same time. Fixes an issue where Logic could quit unexpectedly when loading presets or duplicating tracks containing Audio Units plug-ins on Apple Mac computers with Apple silicon.
Fixes an issue where Logic could quit unexpectedly when left idle with multiple control surface devices connected. Fixes an issue where Logic could unexpectedly stop recording and then go into play mode in certain rare cases. Performance Logic's graphic performance is no longer affected by running Logic Remote on a connected iPad. Copying a take folder by Option-dragging no longer takes an unexpectedly long time.
Presets in Sampler now load faster. Performance when resizing the Key Commands window is improved. Performance is improved when cycling a Live Loops grid with tempo changes. Performance is improved when creating a new empty Drum Machine Designer kit.
Performance is improved when dragging stompboxes into the Pedalboard. Performance when dragging files from from the File Browser to a Drum Machine Designer pad has been improved. Step Sequencer New Live Record mode for real-time capturing note and automation events into rows. New Step Record mode for step entry of note and automation events when pattern is playing or stopped.
New Mono Mode allows only one note step to be enabled per column. Row labels in Step Sequencer can now be custom named. There are now options to sort rows by type, note number, name or DMD sub-track order.
Step Sequencer now offers 2-bar and 4-bar Step Rates. It is now possible to create multiple rows for the same note or automation assignment. The Edit menu now includes a Delete Unused Row option. It is now possible to split a Drum Machine Designer Pattern region into individual Pattern Regions for each kit piece.
The Playhead in the Step Sequencer editor is no longer offset unexpectedly in projects that start earlier than 1 1 1 1. Quantizing or transposing Step Sequencer pattern regions on Drum Machine designer tracks will not cause the row assignments to change.
Entering notes into Step Sequencer pattern regions that are longer than 16 steps no longer causes running playheads to jump to positions within the first 16 steps if the floating Note Repeat window is open.
Step Sequencer now shows only one row per input note in cases where multiple Drum Machine Designer pads use the same note to create layered sounds. The default values for automation row steps no longer update if any steps in the row are already enabled or have manually entered values. Adjusting the pitch setting in a Drum Machine Designer Pattern Sequence row no longer changes the triggered kit piece.
Live Loops The Live Loops cell inspector now correctly shows the quantize value for the currently active take. Live Loops cells now retain changed default Play From settings in the Inspector. If the Live Grid is in focus when a Drummer track is created, a Drummer cell is created. When a currently playing cell in the Live Loops grid is duplicated in the same row, playback is switched to the duplicated cell. Adjusting a Live Loops cell length to be longer than the current Loop length during playback no longer causes the cell to be stuck in play.
Live Loops cells containing Pattern regions now play back in time consistently. Copying Zones from one layer to another no longer also copies their group. Note labels are now created consistently for all slices when creating a Quick Sampler instrument in Sliced mode. Automation Faders are no longer unexpectedly set to 0 db when released in Touch Relative mode. The Eraser tool now reliably deletes automation points.
Enabling the bypass button for automation in the channel strip now dims the automation data instead of hiding it. Fixes an issue where dragging selected automation points to the left in grouped tracks can cause an unselected point just before the leftmost selected point in the grouped tracks to be deleted. Fixes an issue where setting an unselected track to Automation Trim mode could set the selected track to Trim mode.
Fixes an issue where Logic could output a burst of noise with certain extreme automation settings of the High Cut parameter in Channel EQ. Region-baseed automation no longer plays back in muted take regions.
Snap behavior when dragging Region-based automation points has been improved. Automation is now reliably chased and displayed in the track header control when playback is started at any point in a project.
The tooltip when editing automation points now reliably displays below the cursor. It is now possible to record automation with regions on the main track of a Track Stack. Automation written for a Surround Panner with stereo input now writes automation for Angle, as expected. Multiple selected faders now maintain their same relative positions when adjusting one of them after automation has been enabled, disabled, and then re-enabled.
CC data at the beginning of a region or Live Loops cell is now reliably triggered when playback is started at the region start position. Pitchbend data is now chased reliably. Fixes and issue where Chase occasionally generates unexpected Sustain Off messages when adjusting other controls during playback.
Sustain messages are now chased correctly if the Playhead is moved during playback. Region-based Automation is now chased reliably. Chase now properly picks up events from looped regions. Regions with Clip Length enabled no longer cause unexpected notes to be chased at the start of playback. Chase for MIDI messages has been improved. Note events at the start of a region are no longer chased if the left corner of the region starts after the note on. Track Stacks Shift-clicking to select multiple tracks no longer causes tracks inside of closed Track Stacks to be selected.
Fixes an issue where tracks with stereo inputs enclosed in Summing Stacks could change to No Input when loaded as part of a saved Patch. Resolves an issue that prevented Track Stack overview regions from being selected in certain cases in which the Track Stack contained aliases of audio regions. Track Stack patches now display the track name that was saved with the patch. Sustain pedal events now work reliably with all sub-tracks of a Summing Stack in cases where one or more of the tracks has a Key Limit set.
Dragging a region or loop onto a track within a Track Stack now automatically loads inactive plug-ins on the main track of the stack. Dragging main tracks containing nested Track Stacks to different positions in the Track Header no longer causes the dragged tracks to be unexpectedly added to other Track Stacks or to disappear entirely.
New tracks created in a Summing Stack are placed immediately below the currently selected track. Flattening a Take Folder with an active Comp no longer causes Quantize to unexpectedly switch off. Fixes an issue where the Reset All Flex Edits command on a set of Grouped tracks in Slicing mode could throw the regions out of sync with one another.
Grouped tracks containing flexed takes takes now remain in phase when the number of transients in a Quantize referenced track is changed.
Fixes an issue where audio regions set to Flex: Mono mode could sometimes exhibit crackling noises after the region borders are adjusted.
Text now reliably remains visible when typing in parameter values for controls in Alchemy. The Waveform display in the Convolution Reverb no longer disappears if an effect in a prior slot is dragged to a later slot. Moving a Waveshaper instance to another slot no longer causes other instances of Waveshaper to be added. Fixes an issue where saving an edited version of an Alchemy factory preset could create an unnecessary copy of AAZ file.
Plug-ins The Goniometer display in the Multimeter plug-in now continues to show output on Retina displays when receiving stereo white noise. You also have the option to opt-out of these cookies. But opting out of some of these cookies may affect your browsing experience. Necessary Necessary. Necessary cookies are absolutely essential for the website to function properly.
These cookies ensure basic functionalities and security features of the website, anonymously. The cookie is used to store the user consent for the cookies in the category "Analytics". The cookies is used to store the user consent for the cookies in the category "Necessary". The cookie is used to store the user consent for the cookies in the category "Other. The cookie is used to store the user consent for the cookies in the category "Performance".
It does not store any personal data. Functional Functional. Functional cookies help to perform certain functionalities like sharing the content of the website on social media platforms, collect feedbacks, and other third-party features.
Performance Performance. Performance cookies are used to understand and analyze the key performance indexes of the website which helps in delivering a better user experience for the visitors.
Analytics Analytics. Performance when resizing the Key Commands window is improved. Performance is improved when cycling a Live Loops grid with tempo changes. Performance is improved when creating a new empty Drum Machine Designer kit.
Performance is improved when dragging stompboxes into the Pedalboard. Performance when dragging files from from the File Browser to a Drum Machine Designer pad has been improved. Step Sequencer New Live Record mode for real-time capturing note and automation events into rows. New Step Record mode for step entry of note and automation events when pattern is playing or stopped. New Mono Mode allows only one note step to be enabled per column.
Row labels in Step Sequencer can now be custom named. There are now options to sort rows by type, note number, name or DMD sub-track order. Step Sequencer now offers 2-bar and 4-bar Step Rates. It is now possible to create multiple rows for the same note or automation assignment.
The Edit menu now includes a Delete Unused Row option. It is now possible to split a Drum Machine Designer Pattern region into individual Pattern Regions for each kit piece. The Playhead in the Step Sequencer editor is no longer offset unexpectedly in projects that start earlier than 1 1 1 1. Quantizing or transposing Step Sequencer pattern regions on Drum Machine designer tracks will not cause the row assignments to change.
Entering notes into Step Sequencer pattern regions that are longer than 16 steps no longer causes running playheads to jump to positions within the first 16 steps if the floating Note Repeat window is open.
Step Sequencer now shows only one row per input note in cases where multiple Drum Machine Designer pads use the same note to create layered sounds. The default values for automation row steps no longer update if any steps in the row are already enabled or have manually entered values. Adjusting the pitch setting in a Drum Machine Designer Pattern Sequence row no longer changes the triggered kit piece.
Live Loops The Live Loops cell inspector now correctly shows the quantize value for the currently active take. Live Loops cells now retain changed default Play From settings in the Inspector. If the Live Grid is in focus when a Drummer track is created, a Drummer cell is created.
When a currently playing cell in the Live Loops grid is duplicated in the same row, playback is switched to the duplicated cell. Adjusting a Live Loops cell length to be longer than the current Loop length during playback no longer causes the cell to be stuck in play.
Live Loops cells containing Pattern regions now play back in time consistently. Copying Zones from one layer to another no longer also copies their group. Note labels are now created consistently for all slices when creating a Quick Sampler instrument in Sliced mode. Automation Faders are no longer unexpectedly set to 0 db when released in Touch Relative mode.
The Eraser tool now reliably deletes automation points. Enabling the bypass button for automation in the channel strip now dims the automation data instead of hiding it. Fixes an issue where dragging selected automation points to the left in grouped tracks can cause an unselected point just before the leftmost selected point in the grouped tracks to be deleted.
Fixes an issue where setting an unselected track to Automation Trim mode could set the selected track to Trim mode. Fixes an issue where Logic could output a burst of noise with certain extreme automation settings of the High Cut parameter in Channel EQ. Region-baseed automation no longer plays back in muted take regions. Snap behavior when dragging Region-based automation points has been improved. Automation is now reliably chased and displayed in the track header control when playback is started at any point in a project.
The tooltip when editing automation points now reliably displays below the cursor. It is now possible to record automation with regions on the main track of a Track Stack. Automation written for a Surround Panner with stereo input now writes automation for Angle, as expected. Multiple selected faders now maintain their same relative positions when adjusting one of them after automation has been enabled, disabled, and then re-enabled.
CC data at the beginning of a region or Live Loops cell is now reliably triggered when playback is started at the region start position. Pitchbend data is now chased reliably. Fixes and issue where Chase occasionally generates unexpected Sustain Off messages when adjusting other controls during playback. Sustain messages are now chased correctly if the Playhead is moved during playback.
Region-based Automation is now chased reliably. Chase now properly picks up events from looped regions. Regions with Clip Length enabled no longer cause unexpected notes to be chased at the start of playback.
Chase for MIDI messages has been improved. Note events at the start of a region are no longer chased if the left corner of the region starts after the note on. Track Stacks Shift-clicking to select multiple tracks no longer causes tracks inside of closed Track Stacks to be selected. Fixes an issue where tracks with stereo inputs enclosed in Summing Stacks could change to No Input when loaded as part of a saved Patch.
Resolves an issue that prevented Track Stack overview regions from being selected in certain cases in which the Track Stack contained aliases of audio regions. Track Stack patches now display the track name that was saved with the patch. Sustain pedal events now work reliably with all sub-tracks of a Summing Stack in cases where one or more of the tracks has a Key Limit set.
Dragging a region or loop onto a track within a Track Stack now automatically loads inactive plug-ins on the main track of the stack. Dragging main tracks containing nested Track Stacks to different positions in the Track Header no longer causes the dragged tracks to be unexpectedly added to other Track Stacks or to disappear entirely.
New tracks created in a Summing Stack are placed immediately below the currently selected track. Flattening a Take Folder with an active Comp no longer causes Quantize to unexpectedly switch off.
Fixes an issue where the Reset All Flex Edits command on a set of Grouped tracks in Slicing mode could throw the regions out of sync with one another. Grouped tracks containing flexed takes takes now remain in phase when the number of transients in a Quantize referenced track is changed. Fixes an issue where audio regions set to Flex: Mono mode could sometimes exhibit crackling noises after the region borders are adjusted.
Text now reliably remains visible when typing in parameter values for controls in Alchemy. The Waveform display in the Convolution Reverb no longer disappears if an effect in a prior slot is dragged to a later slot. Moving a Waveshaper instance to another slot no longer causes other instances of Waveshaper to be added. Fixes an issue where saving an edited version of an Alchemy factory preset could create an unnecessary copy of AAZ file.
Plug-ins The Goniometer display in the Multimeter plug-in now continues to show output on Retina displays when receiving stereo white noise. Enabling True Peak Detection on one channel of the Limiter or AdLimiter plug-in in Dual Mono mode no longer puts the left and right channels out of phase with one another.
The disclosure triangle for advanced plug-in parameters is now available when the Advanced Tools preference is not enabled. The Peak Hold indicators in the Level Meter and Multimeter plug-ins no longer freeze when the level is reduced during playback. A Software Instrument plug-in window that is in Link mode and minimized no longer blinks when an audio track is selected.
Enabling True Peak Detection in the Adaptive Limiter plug-in no longer causes the overall output level to be unexpectedly reduced. On Mac computers with Apple silicon, switching between channels on dual mono instances of Audio Units plug-ins no longer causes the plug-in display to briefly flicker. The signal now remains in phase when using the Grit or Tubeburner pedal modules in parallel on the Pedalboard. Fixes an issue where the cutoff filter in Retro Synth could sound different after several consecutive presses of the same key.
Audio Units plug-ins with square windows now display properly on Mac computers with Apple silicon. Logic now properly migrates instances of Kontakt 5 to Kontakt 6 after Kontakt has been updated on the computer. Resolves an issue where IRs in Space Designer could be unexpectedly truncated after the project sample rate is changed.
Mixer Fixes an issue where double-clicking on the Surround Panner to open a floating pan window occasionally leads to unexpected changes to the pan position. Selecting multiple channels in the Mixer using the Command or Shift keys now works consistently. Plug-in insert slots now show an indicator when plug-ins are using a sidechain input.
Setting the channel strip in the Main window inspector to Surround output while the Smart Controls view is showing EQ on the Output no longer causes all insert slots on the Output to be filled with Channel EQ instances when the left channel strip is switched back to Stereo.
The Mixer now reliably updates to show that all effects plug-ins have been removed after the Remove All Effects Plug-ins command is used. It is now possible to change the Automation Mode for multiple channels in the Mixer that are not assigned to tracks in the Main window. Groups Group settings now offer an option to create a default set. Groups in tracks with Track Alternatives are now maintained properly when a Take folder is disclosed on one of the tracks in the group. Audio regions on grouped tracks whose anchors are not at the region start point are no longer unexpectedly selected when other non-overlapping regions in other tracks in the groups are selected.
It is now possible to select a region on a track assigned to a group without also selecting overlapping regions on the same track. Drummer now outputs sound when the Vintage Brushes kit is set to play only from the percussion section in the Drummer Editor.
Fixes an issue where clearing all Pads in an instance of Drum Machine Designer could clear plug-ins from shared Auxes associated with the Drum Machine Designer instance. Saving a patch based on a new instance of Drum Machine Designer on a track with a custom track name now uses the track name by default. Loops placed on the main track of a multi-out Drum Machine Designer track stack now play in sync.
Drum Machine Designer sub-tracks can now be sorted. Subtracks for instances of Drum Machine Designer now reliably show icons when the toggling the stack in the Mixer.
The Fill Lock setting is now preserved when a Drummer region is copied. Takes and comping Using Quick Swipe comping from right to left to close a gap between comp segments in a Take no longer causes the entire Take to be unexpectedly be selected in the comp. The Audio File Editor now displays automatically generated Take names as expected. Fixes an issue in which Comps in Take Folders could still be edited on tracks with Track Protect enabled.
Fixes an issue where editing Quick Swipe Comping in an audio Take folder could reset fade lengths. It is now possible to split multiple selected takes in a disclosed Take folder at the same time. Splitting or copying Take regions that have been renamed now appends a number to the name of the new segment. New Take regions created by splitting existing Take regions now show up immediately in the Project Audio window. Region solo now works for selected Quick Swipe comps in Take folders.
Take Folders recorded over a tempo change are now the correct lengths. Track Alternatives Option-drag copying of a region while inactive Track Alternatives are visible no longer leaves the bottommost inactive alternative selected. Fixes an issue where a region exported from a take folder within a Track Alternative can cause the Track Alternative to not work correctly. Recording MIDI to a track showing inactive track alternatives no longer creates aliases on the inactive alternatives.
Dragging an inactive track alternative to the area below the last track in the Tracks Area now creates a new track at the expected location and places the region there. A Track Alternative created by Option-dragging an inactive Track Alternative below itself is now fully available in the Track Alternatives menu.
Fades When a crossfade is edited, the right side of the fade now visibly updates as expected. Moving the anchor for a region in a Smart Tempo Multitrack Set no longer forces the region to be re-bounced. Sound Library It is now possible to use an alias to refer to sound library content manually moved to a non-default location. The Sound Library can now be relocated to volumes on Box. Choosing an individual Drum Machine Designer Kit piece from the patch library no longer resets the volume of a selected Software Instrument track.
The Loops Browser now displays Major and Minor key signature modes. Sorting by tempo in the Untagged Loops area now works as expected. Content The setting to enable Patch Merging in the Patch Library is now remembered when the library is closed and then reopened.
The Library now reliably displays the full path for all content. The Close button in the Essential Sounds download window now closes the window without stopping the download. It is now possible to filter the Sound Library to show patches from specific sound packs. When importing Music XML files, Logic now asks whether to import the tempo map or keep the current tempo.
Drummer regions are no longer created to MIDI regions when importing a Drummer track from another project. Export and bounce It is now possible to bounce a region to a selected audio track that already contains a region that starts at the bounce position.
A progress bar now displays when converting multiple audio files to a compressed format in the Project Audio window. Bounce in Place now includes content before position 1 1 1 1 in a project. It is now possible to bounce a region in place to a selected track when the project and region both start at 1 1 1 1.
Add to Apple Loops Library and Export now generates a 24bit audio file. Audio files exported from a project with a disclosed Take folder now contain tempo and marker information as expected.
MIDI events in regions retain their correct positions when exported as MIDI files from projects with start position earlier than 1 1 1 1. Exporting audio from an extremely long movie now works. The Playhead now reliably returns to the original start position after a bounce between locators is performed. Auto Sampler Fixes an issue where Auto Sampler could unexpectedly truncate some notes while sampling when they include delay taps.
Fixes an issue in which Auto Sampler sometimes would get stuck for a long time recording some notes. The key command to toggle the metronome now properly shows the Metronome Click: Off notification when the metronome is toggled off. The Key Commands editor now resets any selections when it is closed and re-opened. Unpacking folders and Take Folders is now performed with the same key command. The Toggle Track Record Enable key command now works when applied to a group that contains an even number of tracks.
Section headers in the Key Commands window now always remain visible. Shift-clicking the lower left corner of a Global Track now resets its height, just as with other tracks. Impulse Response Utility Removing an audio device from the system not being used by Impulse Response Utility no longer causes it to lose connection to the audio device it is using.
Selection-based Processing Selection-based Processing now works on Take folders. Smart Controls Smart Controls for the Tresonator patch are now available. Score Rubberband selecting lyrics or text in page view no longer selects notes in other staves. Beams now draw correctly at all zoom levels. User-created Text Styles can now be deleted from a project. Notes are now pasted to the correct position in the Score editor in projects that start on a beat sub-division.
Inserted notes in the Score now immediately display correctly at high zoom levels. The Event Float window now opens the first time a note is double-clicked in the Piano Roll.
The function to trim all selected notes to the same position in the Piano Roll now works reliably in all projects. The Event List editor now properly updates to display newly loaded Articulation Sets. The Automatic lane in the Step Editor now updates properly when note data is pasted or transposed in the editor. The Transformer object in the Environment now works properly with bit Pitch Bend data. Both notes created by splitting a muted note in the Piano Roll remain muted. Undo Undo now works for parameter changes in the Mapped Instrument editor.
Performing Undo after creating a Software Instrument track no longer causes unexpected changes besides the removal of the instrument track. Undo now works for routing changes applied to stomp boxes in the Pedalboard plug-in. Changes to the Surround Panner now create Undo steps.
Changes to Mixer channels with Record Automation with Regions enabled now create undo steps. Video Movie audio is now muted when opening a project that has been saved with a floating Movie window open.
If the frame rate of a movie is changed while importing, and the audio is not imported as a separate track, a blue frame indicating the video contains embedded audio is now displayed in the global track as expected. Videos in saved projects now open in the correct aspect ratio after a project containing a video with a different aspect ratio has been opened.
Changes to the transposition value of the keyboard in Logic Remote are no longer reset to 0 when a plug-in or plug-in preset are loaded in the channel. When an Alchemy track is created using Logic Remote, the Alchemy presets are now shown as expected. Logic Remote now reliably shows the currently focused tracks when a group of tracks is selected in Logic.
Control surface buttons now reliably reflect the states of key commands assigned to them. Control surfaces now update to show the status of Mute and Solo buttons when a Step Sequencer row is selected.
MIDI device scripts that contain an image of the device no longer show a generic image for the device in Logic. Logic now correctly installs support for a connected Launchpad if a Mackie Control device is already installed. Adding additional subtracks to a Multi-output Software Instrument in the Live Loops grid no longer creates unexpected empty tracks between the output track and newly created subtracks if a Novation Launchpad is connected.
The Playhead and LCD clock display now reliably show the correct position when the cycle zone is moved while playing. The Playhead now shows the correct position when playing back a very short cycle zone at high zoom levels.
Fixes an issue where moving regions on different tracks at the same time in Shuffle L or Shuffle R mode sometimes creates unexpected gaps. It is no longer possible to copy regions to frozen tracks. The Metronome Toggle notification now properly indicates the state of the Metronome. The main menu now remains fully functional when the Template Picker window is open. Clicking a file in the File Browser with a mouse no longer leaves previously selected files highlighted.
Engaging Track Protect on an armed audio track will now disarm it. Punch recording in Region Erase or Regions punch mode with a zero length Marquee selection no longer creates unexpectedly long regions. Auto Zoom now works as expected when the Cycle zone starts before the start of an open folder in the currently visible area. Aliases created from Folders now contain all the tracks from the original. Sustain pedal events performed during playback now override recorded sustain pedal events.
Text pasted into the Mixer Notes window now properly retains the font and size. Fixes an issue where deleting inactive Track Alternatives for a track could cause the view to jump to the top of the Main window. The playhead now displays at the correct position when switching from Skip Cycle to Cycle mode while playing. Fixes an issue where option-drag copying a Marquee selected area that encompasses a number of complete regions could truncate some of the resulting copies.
If the sample rate is changed when creating a new project, the new sample rate remains in effect when creating subsequent new projects. META 47 events with values above no longer jump to Sustain events can now be set to more granular values. Engaging record with a single-tick length Marquee zone no longer engages Auto Drop. MIDI events in track regions are now displayed more consistently at all vertical track zoom levels. Regions remain selected when automation view is turned off. Fixes and issue where the Create Track sheet could unexpectedly come up again after creating a new track.
Fixes an issue where Insert Silence could affect automation points before the inserted section of silence. Hyperlinks added in Notes fields now open a web browser as expected. Settings in the File Browser are now retained after the Browser is closed and reopened. Fixes an issue where the File Browser could unexpectedly show files hidden by the system. Resolves an issue where double-clicking an audio region on a track could select all other regions on the track when Fade Tool Click Zones is enabled.
Fixes an issue where freezing a Software Instrument track in Source Only mode could result in a silent audio region. Refer to Logic Pro Help for further information on settings or installation.
Visit the Logic Pro support page for more articles and support resources for Logic Pro. Published Date: November 01, Yes No. Character limit: Maximum character limit is Start a discussion in Apple Support Communities. Ask other users about this article Ask other users about this article.
❿
No comments:
Post a Comment